Skip to content

20' x 32' Deck Material Calculator

A 640-square-foot ultra-large deck for estate homes and commercial projects. This size can incorporate multiple level changes, integrated landscaping, and dedicated zones for dining, cooking, lounging, and activities. This 640 sq ft deck requires approximately 126 standard 5.5" x 12' pressure-treated boards, 16 joists, and 20 support posts.

Material Cost Comparison by Decking Type

The table below compares total material costs for a 20' x 32' deck across eight popular decking materials. All estimates use 16-inch joist spacing, perpendicular board pattern, railing on three sides, and one set of stairs. The structural framing (joists, beams, posts, concrete, hardware) is the same regardless of the surface decking material; only the board cost varies between options.

Decking Material Boards Board Cost Total Materials
Pressure-Treated Pine 5.5" x 12' 126 $3,024 $11,543
Composite Decking 5.5" x 12' 126 $6,804 $15,323
Premium Composite Decking 5.5" x 12' 126 $10,584 $19,103
Western Red Cedar 5.5" x 12' 126 $6,804 $15,323
Redwood Decking 5.5" x 12' 126 $12,096 $20,615
Ipe Hardwood 5.5" x 12' 126 $13,608 $22,127
Mahogany Decking 5.5" x 12' 126 $9,828 $18,347
PVC Decking 5.5" x 12' 126 $9,072 $17,591

Complete Material Breakdown (Pressure-Treated Pine)

The following table provides a complete bill of materials for a 20' x 32' deck using pressure-treated pine 5.5" x 12' decking boards. This represents the most common and affordable configuration for residential decks of this size. Each line item includes the quantity needed and estimated cost at current retail pricing.

Material Specification Quantity Est. Cost
Decking Boards 5.5" x 12' PT Pine 126 boards (1512 lf) $3,024
Joists 2x10 pressure-treated 16 joists (512 lf) $819
Beams 2x10 doubled pressure-treated 5 beams (200 lf) $320
Posts 6x6 x 8' pressure-treated 20 posts $3,520
Concrete 60lb bags for footings 40 bags $240
Deck Screws #10 x 3" coated 7 boxes (2240 screws) $385
Hardware Joist hangers & bolts 16 hangers, 40 bolts $160
Railing Posts, rails, balusters 84 lf (15 posts) $2,940
Stairs Stringers & treads 3 stringers, 4 treads $135
Total Material Cost $11,543
Professional Labor Estimate (~$25/sq ft) $16,000

Board Pattern Comparison

The board-laying pattern affects both the visual appearance of your deck and the amount of material needed. More complex patterns require additional waste allowance due to the angled and mitered cuts involved. The table below shows how pattern choice affects board count and decking cost for a 20' x 32' deck using pressure-treated pine.

Pattern Boards Needed Linear Feet Board Cost
Perpendicular (10% waste) 126 1512 lf $3,024
Diagonal (15% waste) 131 1572 lf $3,144
Herringbone (20% waste) 137 1644 lf $3,288

Permit and Code Check for a 20' x 32' deck

At 640 sq ft, this footprint is 440 sq ft over the 200 sq ft ceiling in Section R105.2 of the International Residential Code, so the small-deck permit exemption is off the table no matter how low or how detached the deck is. Plan on a permit application with a framing plan, footing layout, and ledger detail, then a footing inspection before concrete and a final inspection.

A guard (railing) is required by Section R312.1.1 wherever the deck surface is more than 30 inches above the grade within 36 inches of the edge, which is why this estimate prices railing on the three open sides. A deck low enough to skip the guard also skips the $2,940 railing line below. Design loads for a residential deck are 50 psf (40 psf live per Table R301.5 plus 10 psf dead), so a 20' x 32' deck is designed to carry about 32,000 lb in total, or roughly 1,600 lb per post across the 20 posts in this layout. Footing size depends on that per-post load and your soil's bearing capacity (Table R507.3.1), which is what the inspector checks at the footing stage.

Board Length Planner for a 20-Foot Run

Decking runs across the 20-foot width of a 20' x 32' deck, perpendicular to the joists, in 69 rows along the 32-foot length. Stock decking comes in 8, 12, 16, and 20-foot lengths, and the length you choose decides how many butt joints each row has and how much offcut you throw away. For this run a 20-foot board is the efficient choice: one full board per row with no joints and nothing left over.

Stock length Boards per row Joints per row Offcut per row Waste Boards for 69 rows
8' boards 3 2 4' 17% 207
12' boards 2 1 4' 17% 138
16' boards 2 1 12' 38% 138
20' boards (best) 1 0 none 0% 69

Counts above are exact layout counts before a cutting allowance; the material tables on this page add 10% for a perpendicular pattern. Stagger joints across adjacent rows so no two land on the same joist bay, and land every joint over a joist with a block or sister beneath it.

Planning a 20' x 32' deck

A 20' x 32' deck provides 640 sq ft of outdoor living space. At this size, you are building a substantial outdoor living area that rivals the size of many indoor rooms. Decks of this magnitude benefit from professional design to optimize the layout, may require engineering review for structural adequacy, and often incorporate features like built-in seating, planter boxes, pergolas, or outdoor kitchen islands. The investment in quality materials pays dividends at this scale because the large surface area amplifies the visual and tactile impact of your material choice.

For a deck of this size, the structural framework requires 16 joists (2x10 lumber, 512 linear feet total) running the 32-foot length at 16 inches on center, 5 doubled beams spanning the 20-foot width and set no more than 8 feet apart, and 20 support posts on concrete footings. That beam spacing keeps each joist's clear span to 8', inside the 2x8 line of the IRC deck joist table for every listed species. Fewer beams means longer spans and larger joists; the table in Section R507.6 gives the trade-off for your species and snow load.

The total material cost for this deck ranges from approximately $11,543 using pressure-treated pine to $17,591 with premium decking materials. Professional installation adds approximately $16,000 at a typical rate of $25 per square foot. Many homeowners choose to DIY the construction to save on labor costs, which is feasible for experienced builders with this size deck, though permits and inspections may still be required by your local jurisdiction.

How This Estimate Works

  • Board counts use the board's actual face width plus a 1/8-inch gap, with a 10% cutting allowance for perpendicular layouts (15% diagonal, 20% herringbone).
  • Framing assumes joists at 16 inches on center running the length, doubled beams no more than 8 feet apart, posts at beam ends and every 8 feet, two 60 lb bags of concrete per footing, and 4x4 posts up to 200 sq ft (6x6 above).
  • Prices are national retail estimates in the material tables and will differ from your local yard; labor is a flat $25 per square foot placeholder. Get three quotes.
  • Code references: permit exemption, Section R105.2 (see Fine Homebuilding's homeowner's guide to deck permits); deck joist spans, Table R507.6 (reprinted in WAC 51-51-0507, Washington's adoption of the 2021 IRC deck chapter); live load, Table R301.5; guards, Section R312.1.1. Your jurisdiction's adopted edition and local amendments govern.

Frequently Asked Questions

How many boards do I need for a 20' x 32' deck?

For a 20' x 32' deck (640 sq ft), you need approximately 126 boards using standard 5.5" x 12' pressure-treated lumber with a perpendicular pattern (10% waste factor). If you choose a diagonal pattern, increase that to about 131 boards, or 137 boards for a herringbone pattern. The exact count varies by board length and width; longer boards mean fewer pieces but potentially more waste on cuts.

How much does a 20' x 32' deck cost to build?

Material costs for a 20' x 32' deck range from approximately $11,543 with pressure-treated pine to $17,591 with premium materials like ipe or PVC, including framing, hardware, railing, and stairs. Adding professional labor at approximately $25 per square foot brings the total installed cost to between $27,543 and $33,591 depending on material choice and local labor rates.

What joist size should I use for a 20' x 32' deck?

This estimate frames a 20' x 32' deck with 16 joists at 16 inches on center running the 32-foot length, carried on 5 beams spaced no more than 8 feet apart, so each joist's clear span is 8'. The IRC deck joist table (Table R507.6) permits a No. 2 2x8 at 16-inch spacing to span at least 8 feet 10 inches on every species line, so 2x8 joists cover that span; the estimate specifies 2x10 (512 linear feet total). If you want fewer beams and a longer clear span, step up to 2x10 or 2x12 per the table for your lumber species and snow load.

Do I need a permit for a 20' x 32' deck?

Almost certainly yes. At 640 sq ft, a 20' x 32' deck is 440 sq ft over the 200 sq ft ceiling in IRC Section R105.2, so the small-deck permit exemption does not apply regardless of height or whether it attaches to the house. Expect a plan review covering footings, ledger attachment, guards, and stairs, plus at least a footing inspection and a final.

What length decking boards waste the least on a 20' x 32' deck?

Boards run across the 20-foot width, so a 20-foot board lays out best: one board per row with no butt joints and no offcut. With 69 rows across the 32-foot length that is 69 boards before the usual 10% cutting allowance.

Deck Building Materials

Quality lumber, composite decking, and installation services.

Some links above are affiliate links — if you buy through them we may earn a small commission at no extra cost to you. As an Amazon Associate we earn from qualifying purchases.